woom VALVE EXTENSION

The valve extension allows for a streamline connection for your woom 1 tubes. This extension connects directly to the Schrader valve on your bicycle tube and is compatible with standard floor pumps. The steps below and how to video walks you through the actions needed to connect the extension. 

Installation Steps

1. Remove valve cap from the tube that you want to inflate

2.Install the valve extension on the tube valve and point it outwards

3.Install your bicycle pump onto the valve extension

4.Inflate the tube to 30-40 PSI

5. Remove the pump from the valve extension 

6.Remove the valve extension from the bicycle tube

7. Re-install the original valve cap onto the tube

Still need help? Contact Us Contact Us